Sunday, November 15, 2026

ACW era buildings and ruins ... all in one

 I found a cache of paper based 'hollow' 15mm (roughly) buildings that would fit well for old west or American Civil War games.

I cannot recall if these came from Jeff's collection or if I got them from Dave. 


they came all flat like this
no instructions in the baggie

I took some time to sort thru them
and figure out that I had most of the
parts for most buildings

they went together fairly easily
only a few spots needed some sanding

each building was a hollow shell
this made for a simple way to shift
from intact building to 'burn out'

I had loads of wood scraps from making the
bases for all the 15mm ACW troops
these now were put to use 


I made the innards mostly fit
with the building it was to connect with

the little buildings were simple
to come up with the burn-out version

There was at least one brick building and I had another
solid building, that I planned to do burn out versions of.

So I broke out my LINKA moulds and some water-putty
to make the brick sections I would need for the burn out
building parts

one building had brick outer
on the ground floor

there were also chimneys that would need
brick stacks

LINKA on the left
with a burn out section on top

these were built while the VWQ
was active on the tabletop

the LINKA brick sections matched
the first floor distance exactly, this was
a nice find

I decided to use mostly inks in painting these

the ink worked well in the 'wooden' sections

I experimented with some different mixes of ink

the inner surfaces were not painted at all

again the inks worked in their own shading

the inks created their own details

I could see that the 'dark roof' slate or tiles
were going to need some other painting

all the 'burn outs' got black and white
'zenithal' treatment

then once the VWQ game was done, I was
able to get all these out and do the matching
details on the burn outs

I also did up the details on the roof sections
so that the 'long lines' tiles did not show
as well as the chimneys' were painted

the clear matte coat is still wet in this photo
I decided to matte coat as the inks were shiny
in places

the shine here is from the we matte coat

as the matte coat dried everything
would have the same finish

now with the matte coat dry, the wood or stone
base markers can be seen outside
the trays

I use the markers to indicate where
the buildings are, so that 15mm troops can
still line up on them

there are 16 buildings in all, only one with stone

a good new addition to the AWC tabletop
terrain supports, going into an Antietam or
Gettysburg game 

2 comments:

daveb said...

Nice! They have reached the daylight of being painted! Pretty sure those came from me. They are Iliada, very creative Turkish guy who had some well priced stuff. Unfortunately he passed away a couple of years ago. Had some progressive brain or spine tumor that I think wasn't responding well to treatment.

MurdocK said...

Thank you for the extra info Dave!

Yes, it is better to see things finished off - maybe we can throw down some time with these on the tabletop ... so you can set them alight?